testo 330 Flue gas analysis with increased convenience and reliabilty

testo 330-1 LL Now with

The major advantage of flue gas analysers lie in their dialog feature: instrument diagnosis provides information about the qualitative status of functions at the touch of a button.

For example, the level in a condensate trap but also wearing parts such as the condition of the gas sensors.

Maintenance intervals are displayed allowing you to plan better. The times when an analyser let the user down all of a sudden are a thing of the past. Modular probes such as ΔT, ΔP, flue gas are recognised automatically by the analyser so that measurement results appear immediately in the display. The probes have a probe quick release device with which all of the gas paths are connected without mix-ups. The single cable is rigid, indestructible, saves space and creates order. The particle filter is located directly in the probe's handle. Probe shafts with different lengths and diameters can be easily attached to the probe handle.

KEY FEATURES
- Instrument diagnosis
- ΔT measurement, flow/return
- Ambient CO measurement
- Ambient CO₂ measurement
- Detects gas leaks using gas leak detection probe
- ΔP measurement for gas pressure
- Gas/oil throughput
- 200 measurement data sets, system numbers included
- IRDA interface for data transfer to PDA/Notebook
- Bluetooth wireless transfer (optional)
- TÜV By RgG 250 acc. to 1. BlmSchV
- Official test acc. to EN 50379-2 for O₂, °C, hPa
- Official test acc. to EN 50379-3 for CO
- USB interface for data transfer to PC
- Data management with easyheat software (PC) and easyheat.mobile (Pocket PC)

SPECIFICATIONS

Temperature

-40 to +1200 °C

Draught measurement

-9.99 to +40 hPa

Pressure measurement

0 to 200 hPa

O2 Measurement

0 to 21 Vol. %

CO measurement (without H2 compensation)

0 to 4000 ppm

Efficiency measurement (Eta)

0 to 120%

Flue gas loss

0 to 99.9%

CO2 measurement Display range

0 to CO₂ max

Option: NO_low measurement

0 to 300 ppm

Option: NO measurement

0 to 3000 ppm

Ambient CO measurement (with CO probe)

0 to 500 ppm

Gas leak measurement for combustible
gases (with gas leak detection probe)
Display range

0 to 10,000 ppm
CH₄ / C₃H₈

Ambient CO2 measurement
(with ambient CO2 probe)

0 to 1 Vol. %
0 to 10000 ppm

General technical data
Memory	400 sites
Weight	600 g (without rechargeable battery)
Dimensions	270 x 90 x 65 mm
Storage temp.	-20 to +50 °C
Oper. temp.	-5 to +45 °C
Display	Graphics display 160 x 240 pixel
Power supply	Rech. block 3.7 V / 2.2 Ah Mains unit 6 V / 1.2 A

Warranty
Instrument/probe/gas sensors (O₂, CO)	4 years
NO, NO_low sensor	2 years
Thermocouple and battery	1 year

testo 330-2 LL Now with

The flue gas analyser is a reliable companion regardless of whether it is for breakdowns or emergencies, monitoring legal limits or used during everyday maintenance. It supports a fast switch between measurement and maintenance. It can remain positioned in the flue during draught and flue gas zeroing. For applications under extreme conditions, such as badly polluted furnaces, Testo’s patented technology guarantees reliable display of a CO value up to 30,000 ppm.

KEY FEATURES
- Instrument diagnosis
- Automatic instrument leakproofness test
- ΔT measurement, flow/return
- Ambient CO measurement
- Ambient CO₂ measurement
- Detects leaks with gas leak detection probe
- ΔP measurement for gas pressure
- Gas/oil throughput
- 400 measurement data sets incl. site address and system no.
- IRDA interface for data transfer to Pocket PC/notebook
- Bluetooth wireless transfer (optional)
- USB interface for data transfer to PC
- Interface to automatic furnaces
- TÜV By RgG 251 acc. to 1. BlmSchV
- Official test acc. to EN 50379-2 for O₂, °C, hPa und CO
- Draught zeroing without probe removal. The probe can remain in the flue during zeroing
- Zeroes flue gas sensors without probe removal

SPECIFICATIONS