We have used the latest electrochemical technology for the detection of a large number of gases. Please note that there are a broad number of possible configurations available for each of our products, and that they can be configured to meet the needs of a number of industries and applications. If you ever have any questions as to whether our products can meet your specific needs, please don't hesitate to contact us. Remember, we're with you each step of the way.

    D-Guard²

    D-Guard² offers world leading 2-wire loop powered NDIR methane and carbon dioxide monitoring capability, allowing greater numbers of detectors to be driven from smaller power supplies, reduced cable diameters... Read More


    D-Guard²R

    D-Guard²R comes standard with a built in relay board. This includes 3 relays; 2 for the low and high alarms set within the transmitter and a third for fault. ... Read More


    D-Guard²S

    Designed from the ground up to provide reliable, accurate and flexible gas detection, the D-Guard²S incorporates leading edge technology. ... Read More


    C-Guard

    GasTech Australia has released the latest series of GasTech’s digital gas detectors the C-GuardTM. This new style of gas detector uses an advanced processor and program logic.... Read More


    S-Guard Tx

    The GasTech Australia GTD-2000Tx is part of the S-Guard TM smart transmitter series and includes instruments for both toxic gas detection and oxygen concentration monitoring. The sensing element technology provides long operational life... Read More


    S-Guard Ex

    GasTech Australia Smart Guard series S-GuardTM Series GTD-2000Ex hydrocarbon Gas detector is a catalytic smart  transmitter. The sensing and reference elements are self-compensating... Read More


    B-Guard Millennium CO2

    GTA Millenium infrared carbon dioxide detector is a single source dual wavelength instrument. The sensing and reference elements are self-compensating for optical integrity and other signal inhibitors. The industry standard 4-20mA analog output... Read More


    B-Guard Millenium LEL

    GasTech Millenium Series Infrared hydrocarbon detector is a single source dual wavelength instrument. The sensing and reference elements are self-compensating for optical integrity and other signal inhibitors. ... Read More


    B-Guard Catalytic

    GasTech Australia has used the latest low power switch mode technology for the detection of combustible gas in LEL and ppm levels. This unique amplifier has a built in capabilities to be either a 4-20mA source or sink, simply by the positioning... Read More


    Sensepoint XCD

    The Sensepoint XCD range provides comprehensive monitoring of flammable, toxic and oxygen gas hazards in potentially explosive atmospheres, both indoors and outdoors. ... Read More


    RAEGuard 2 PID

    The RAEGuard 2 PID is a fixed photoionization detector (PID) that measures a broad range of volatile organic compounds (VOCs). The RAEGuard 2 PID operates on 10 to 28 VDC and provides an analog (4-20mA) three-wire signal output, ... Read More


    TVOC Fixed PID Detector

    TVOC is the first fixed ATEX approved photoionisation detector (PID) for the continuous detection and measurement of total volatile organic compounds (VOCs). With an intelligent 4-20 mA analogue output, TVOC can be simply integrated into a DCS ... Read More


    Airscan IRF9

    The industrial refrigeration industry is changing rapidly. The manufacture of R-22 and other HCFCs are being phased out, and manufacturers of cooling systems are introducing new equipment that runs on 407a, 422d, 410a, NH3 and CO2.... Read More


    O2NE+ Detector

    The O2NE+ is an oxygen depletion monitor ideal for use where there is threat of a potential leak or build-up of inert gas such as: Nitrogen, Argon, Helium. The O2NE+ provides two audio visual alarms which are pre-set at 19.5%... Read More


    Ax60K

    Carbon dioxide (CO2) is stored and used in fast food kiosks for the carbonation and dispense of beverages. CO2 is a toxic gas that is colourless and odourless and not detected by human senses.... Read More


    A50 CO2 Detector

    The Experts in Beverage and Hospitality Gas Safety. This plug and play CO2 detector is simple to wall mount in the area where CO2 is stored or piped and will provide audio/visual alarms should there be a leak which exceeds permissible... Read More


    H-Guard

    The H-Guard is a CO2 transmitter series designed to be installed in HVAC applications. The CO2 sensing element uses the Non-Dispersive Infrared Technology (NDIR) with the patented self-calibration system to guarantee the long term stability... Read More


    H-Guard-D

    The H-Guard-D is a CO2 transmitter series designed to be installed in HVAC return air ducts. The CO2 sensing element uses the Non-Dispersive Infrared Technology (NDIR) with the patented self-calibration system to guarantee the long term stability... Read More


    H-Guard-L

    The H-Guard-L is a CO2 transmitter series designed to be installed in HVAC applications. The CO2 sensing element uses the Non-Dispersive Infrared Technology (NDIR) with the patented self-calibration system to guarantee the long term stability... Read More


    AX60+

    The CO2 and O2 sensors are interchangeable and can be fully integrated as part of a multi-point, multi-gas detection and alarm system. The CO2 sensor is set by default to trigger a low-level alarm at 1.5% CO2, an evacuation alarm at 3% CO2 and a time-weighted average alarm of 0.5% CO2 measured over eight hours... Read More


    CO2 Meters CO2 Detector

    CO2 alarms are critical in breweries, wineries, beverage dispensing areas, restaurants, fast food establishments, dry ice storage, CO2 storage tanks, laboratories, or anywhere CO2 is stored or produced in high volume.... Read More


    GM2S Marine Hydrocarbon

    When it comes to the safety and the protection of your assets a gas detection systems is a critical device on all transport vehicles where LPG gas and Petrol is being stored or used. You need a combustible... Read More