Part Number: 81-8018-04

ToxiPRO IQ Express

Essential for use of your ToxiPRO the IQ Express system will ensure the instrument is not only responding correctly to gas, but alarming correctly also. The system is compact enough to easily fit in small carry cases and can even operate of USB power!

List of Benefits

  • Automated tests
  • Single or multiple docks
  • Configuration options
  • PC Control
  • Efficient and economical

 

Assured Safety and Compliance in under 20 seconds.

The IQ Express is the perfect complement to our new personal gas detectors, the ToxiPro and ToxiLtd. The IQ Express is a fully automated bump test station that performs up to eight critical tests including:

  • Sensor Identification
  • Battery Test
  • Audible Alarm Test
  • Visual Alarm Test
  • Vibrating Alarm Test
  • Fresh Air Calibration
  • Bump Test
  • Record Keeping

If the instrument fails the bump test, the IQ Express will automatically initiate a full span calibration without further intervention from the user.  Total processing time with a full span calibration is still under one minute depending on sensor.

Improve record keeping efficiency. Just place the in the dock and the IQ Express Station does the rest. The IQ Express is cost effective and requires no testing or special clerical skills to use. Workers can check their instruments quickly and easily, minimizing the impact on their work schedule.

The IQ Express connects to your PC via USB to download instrument data. To make testing even easier, you can connect up to 4 IQ Express Stations to a single PC and even run them off the same cylinder of calibration gas (as long as the units have the same type of sensor).

Key Features

  • AUTOMATED TESTS
    • Automatic Instrument Identification
      Automatic Battery Test
      Automatic Alarm Tests (audible, visible, vibrating)
      Automatic Bump Test
      Automatic Calibration (if necessary)
      Automatic Record Keeping
      Automatic Ready / Fault indication
       
  • SINGLE OR MULTIPLE DOCKS
    • Cascade between 1 and 4 docks
  • CONFIGURATION OPTIONS
    • Standalone calibration station
    • Connected to PC via USB or into network via ethernet
  • PC CONTROL
    • Connect to a PC for enhanced control over calibration and data acquisition during testing
  • EFFICIENT AND ECONOMICAL
    • Bump test in under 20 seconds
    • Calibration in under 1 minute
-->
 

Share this