M-POWER POLI MP400T
Docking Station for mPower Multi-Gas Detectors
The POLI MonoDock (MP400T) is a docking and calibration station for the POLI Multi-Gas Detectors.List of Benefits
- Simple & Fast: One-button operation for either bump test or calibration
- High Capacity: 2,000 calibration or bump record storage in reliable FLASH Memory
- Convenient: Records can be downloaded without the POLI in place
- Portable: Battery power for up to 1000 bump tests
- Robust: All-in-one hard case
The MP400T provides fast and easy calibration or bump testing: just place the POLI in the bay, connect the cable, and push start.
All calibrations and bump test results are stored in on-board memory as a compliance record downloadable separate from the instruments themselves.
The docking station is designed to operate with the four commonly measured gases Oxygen (O2), Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Methane (CH4), Ammonia (NH3), Hydrogen Cyanide (HCN), plus Isobutylene for PID, and several other toxic gases.
SThe MonoDock has rechargeable batteries and is portable for remote use. Two versions of the MonoDock are offered: one for pumped POLI instruments and one for diffusion POLI instruments.
| Specification | Detail Description |
|---|---|
| Size | 9.2 x 7.5 x 4.3 in / (23.5 x 19.0 x 10.7 cm) |
| Weight | 4.4 lbs. (2.0 kg) |
| Number of Units | One (1) POLI Pump Monitor |
| Battery | Rechargeable Lithium battery, up to 1000 bump tests on a single charge |
| Temperature | 32°F to 122°F (0°C to 50°C) |
| Humidity | 5 to 95% relative humidity (non-condensing) |
| Event Log | 2000 Calibration or Bump records |
| Power & Communications | Connection USB (Type A) |
| Test Gas Supply | Cylinder(s) & regulator(s) (not included) outside MonoDock, Demand flow regulator(s) preferred, Diffusion POLI |
| Gas Connections | Quick-connects for 6-mm o.d. tubing, 2 Test gas inlets for calibration/bump, Air inlet for zeroing |
| Calibration Gases | Gas mix with up to 4 gases > Oxygen (O2), Carbon Monoxide (CO), Hydrogen Sulfide (H2S), Methane (CH4), Isobutylene (C4H8, for PID), Carbon Dioxide (CO2), Ammonia (NH3), Hydrogen Cyanide (HCN), Nitric Oxide (NO), Phosphine (PH3), Sulfur Dioxide (SO2), Ethylene Oxide (ETO), Methyl Mercaptan (CH3SH), Tetrahydrothiophene (THT) |
| Safety Certifications | For use in non-hazardous locations |
| Warranty | 1 year |